LF CabiLED DL 4000K White

Very elegant, energy-saving flat mini-downlight LED lamp. The best CITIZEN LED light sources!

Lamp suitable as the main indoor light source in various places.

Quantity

The minimum purchase order quantity for the product is 1

Reference: cabi_dl_4000K_w

Condition: New product

Availability date:

Share on Facebook!
Send to a friend
Send to a friend

CabiLED DL 4000K White
Very elegant, energy-saving flat mini-downlight LED lamp. The best CITIZEN LED light sources!
Lamp suitable as the main indoor light source in various places.
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

Data sheet

Light color	Neutral white (4000K)
Light angle	60&deg
CRI (Ra)	min. 80
Rated power	5W
Supply Voltage	CC: 9V - 9,6V
Supply Current	CC (Constant current) max. 500mA
Dimming	Possible
Way/protocol of dimming	When used with dimmable LED driver
Dimensions in mm	105x105x9 (only 9mm thick)
Light source	Integrated PowerLED (service possible)
Life span	min. 70 000h (16 years of 12h/day work)
IP grade	IP20
Mounting way	Double side adhesive tape (included)
LEDs type	Citizen
Case material	Plastic
Warranty	3 years
Casing color	White

More info

Fixture only 9mm thick. It is made of acrylic glass with glossy surface.

The lamp contains 1 LED light source of 5W max power. We use only Worlds best CITIZEN COB LED light sources.

The light source can be supplied/driven with respect to following rules:

Parameters of light source:

max. current: 500mA*; voltage 9 - 9,6V. Max Power: 5W. Constant Current Power Supply. You will find suggested power supplies below.

*The user must always use suitable Constant Current power supplies. The output current of a CC power supply cannot exceed the max. current of a light source. Lower currents will give You less light output, but bigger lifetime and efficacy. Light sources must be connected together in series and the power supply must be chosen with the right ouput current (not higher than max. current) and output voltage range containing the voltage of connected light source/sources. Series connection of multiple light sources always means the same current as single source, but multiplying the voltage range of single light source. i.e. if You connect two light sources of max 500mA current and 9 - 9,6V each - the series connection will require still 500mA max, but 18 - 19,6V overall voltage.

Using dimmable power supplies is possible with respect to all driving/power supply rules. Some of them You can find below.

Never use other type of power supply than pointed in the instruction. It may cause damage to light sources.

!!! CAUTION !!!

Always ask a professional to mount and connect the circuits. Remember that dealing with 230V by amateur can be fatal!

Never power up CC power supply when the output circuit is opened or not connected at all. If it happens (i.e. You connected to 230V and there is no reaction) - unplug the power supply from 230V and after that - short circuit the output cables or clamps to discharge the voltage created between them as it can be too high (and harmful) for the light sources. Then make sure to close the circuit in the right way and retry connecting the power supply to 230V grid.

Above means that You must not also connect powered/working CC power supply to any light source. It may cause damage to the light source.